stalling, smoother power and better traction for very little money.
-Smoothes power delivery.
-Easier power control, resulting in better hookup.
-Adds momentum to the rotating mass of the engine therefore less stalling.
-Engine is able to “tractor” better low down.
-Adds better hookup and traction.
-Complete within several minutes. Remove the existing 6 bolts that fasten the assembly and put the weight onto the
outside of the big washer. If you are using the stock clutch cover on the 2020 to 22 bikes, you have to remove the 3 small
steel plates inside your stock clutch cover. (see the picture attached)
Condition: 100% Brand new
1X 9 oz/255g（±5g） Clutch Weight
250/300 SX/XC/EXC/XC-W/SIX-DAYS TPI 2013-2022
250 EXC-F/XCF-W/SIX-DAYS 2014-2022
350 EXC-F/XCF-W/SIX-DAYS 2012-2022
250/350 XCF/SXF 2019-2022
450/500 EXC/EXC-F/XCW/SXF/XCF 2012-2022
EX/EX F 250/300 2021-2023
MC/MC F 250/350/450 2021-2023
EC /EC F 250/300/350 2021-2023
250/300 TE/TC/TX 2014-2022
250/350/450/501 FE 2014-2022
FC 250 2019-2022
FC 350 2019-2022
FC 450 2014-2022
FX 350 2019-2022
FX 450 2017-2022
Disclaimer: (RacingMotor) parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including KTM,